Equilox Hoof Putty

• Equilox Hoof Puttty has a 3 – 5 minute worklife and an initial set time of 5-7 minutes.
• When fully cured Equilox Hoof Putty may be filed and drilled.
• Net Weight 4 oz. (114 grams)

HINTS FOR USE:
• Equilox Hoof Puttty adheres to hoof wall. Best results will be achieved if area is first roughened by sanding or filing then cleaned to prepare surface.
• Starts to harden 2 minutes after mixing. Repair should be in place before hardening starts.
• A smooth finish can be obtained by rubbing with wet finger or damp cloth before hardening begins.
• Equilox Hoof Puttty can be drilled and filed after one hour of curing (hardening).
• Cannot drive nails into hardened putty.
• Not to be used as a substitute for Equliox in situations that require strength and flexibility.
• Use for cosmetic purposes only, not intended for permanent repair.
• Wash hands thoroughly with soap and water after using Equilox Hoof Puttty.
________________________________________
DIRECTIONS:
• For best results, clean and roughen bond area prior to application.
• Twist or cut off required amount.
• To mix, knead with fingers to a uniform color.
• Apply to surface to be repaired (within 2 minutes of mixing). Force into any cracks or holes to be filled and strike off excess material.
• For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening.
• Remove excess material before hardening begins.
• After 10 minutes the epoxy will harden and form a tenacious bond.